DTP2 T 202 FB

概述

DTP2 T 202 FB 是一款 2 路输入发送器，可通过单根 CATx 屏蔽电缆将 DisplayPort、HDMI、音频和控制信号发送至 100 m (330') 远的距离。其独特的结构提供了灵活的地插盒安装解决方案，可兼容 OBO Bettermann 以及 Honeywell、Electraplan 和 PUK 的 MK 型号。DTP2 T 202 FB 支持分辨率高达 4K/60、4:4:4 色度取样的视频信号，并符合 HDCP 2.3 标准。它采用模拟立体声音频加嵌、各路输入之间的自动切换和 RS-232 远程控制功能，便于在无人值守的环境进行操作。DTP2 T 202 FB 设计用于 DTP® Systems，能够隐蔽地放置在讲台、桌下的地插盒内或其它符合应用需求的空间。

主要特性

• 设计安装在各种地插盒内
• 通过单根 CATx 屏蔽电缆将 DisplayPort、HDMI、控制和模拟音频信号传输至 330' (100 m)远的距离
• 支持分辨率高达 4K/60 @ 4:4:4 的视频信号
• 各路输入之间的自动切换
• 模拟立体声音频加嵌
• 支持数据速率高达 21.6 Gbps 的 DisplayPort SST (单路流传输) 信号
• 所有特性

技术参数

也请参阅我们的  PDF 格式的技术参数

DTP2 T 202 FB
specification
Horizontal frequency	15 kHz to 135 kHz for resolutions up to 18 Gbps
Vertical frequency	24 Hz to 120 Hz for resolutions up to 18 Gbps
Chroma sampling1	4:4:4, 4:2:2, or 4:2:0
Color bit depth1	8, 10, or 12 bits per color
Signal Type	HDMI 2.0b; HDCP 2.3
Max. video data rate	18 Gbps (6 Gbps per color)
NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.
Video
NOTE     Extron strongly recommends compatibility testing while designing, and before installing, any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Applications Engineer for more information.
HDMI input
Maximum data rate	18 Gbps (6 Gbps per color)
Maximum pixel clock	600 MHz
Resolution range	Up to 2560x1600* @ 60 Hz or UHD (3840x2160) @ 60 Hz *with 4:4:4 chroma subsampling
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Formats	RGB and YUV digital video
Standards	DVI 1.0; HDMI 1.4, 2.0b; HDCP 1.4, 2.3; CEA-861E
DisplayPort Input
Maximum data rate	17.28 Gbps (5.4 Gbps per channel)
Maximum pixel clock	600 MHz
Resolution range	Up to UHD (3840x2160) @ 60 Hz with 4:4:4 chroma subsampling
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Formats	RGB and YUV digital video
Standard	DisplayPort 1.2
Video input — HDMI
Number/signal type	1 HDMI input (or single-link DVI-D with the appropriate DVI-HDMI adapters)
Connectors	1 female HDMI type A
Video input — DisplayPort
Number/signal type	1 DisplayPort
Connectors	1 female 20-pin DisplayPort
Input cable length	Up to 6 feet
Interconnection between transmitter and receiver
Connector	1 female RJ-45 per unit
Termination standard	TIA/EIA T568B
Transmission distance	Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (shielded twisted pair)
NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Audio
Gain	Unbalanced output: 0 dB; balanced output +6 dB
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	0.03% @ 20 Hz to 20 kHz at maximum output
S/N	>90 dB, at maximum output (15 dBu), unbalanced (unweighted)
Stereo channel separation	>80 dB @ 1 kHz to 20 kHz
Analog Audio Input
Number/signal type	1 analog stereo, unbalanced 2 digital audio, embedded on the HDMI and DP
Embedded digital audio source formats	2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
Connectors	1 female 3.5 mm mini stereo jack, 2 channel: tip (L), ring (R), sleeve (ground)
Impedance	>10k ohms, DC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+7dBV (unbalanced)
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port	1 RS-232, 3.5 mm captive screw connector, 3-pole, rear panel
Pin configuration	Pin 1 = Tx, pin 2 = Rx, pin 3 = GND
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
USB control port	1 female mini USB type B, front panel
USB standards	USB 2.0 high speed
Over DTP/HDBT RS-232/IR pass through	RS-232: Pin 1 = Tx, Pin 2 = Rx, Pin 3 = GND IR: Pin 4 = Tx, Pin 5 = Rx
Program control	Extron Simple Instruction Set (SIS™)
General
Power supply	External Input: 100 to 240 VAC, 50-60 Hz Output: 12 VDC, 2 A, 24 watts
Power consumption
Device	8.7 watts
Device and power supply	10.3 watts
Remote power budget	18 watts
NOTE     Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
Ambient temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vented
Thermal dissipation
Device	29.6 BTU/hr
Device and power supply	35.0 BTU/hr
Mounting
Floor box mount	Ackermann GB3/OBO Betterman floor box, MK Electric CableLink Plus Single Pan floor box, MK Electric CableLink Plus Modular floor box, ElectraPlan floor box, and PUK floor box mountable
NOTE     See the DTP2 T 202 FB User Guide for mounting considerations.
Enclosure type	Metal
Enclosure dimensions	2.3" H x 2.8" W x 5.2" D* (5.9 cm H x 7.2 cm W x 13.2 cm D) (Dimensions exclude connectors) *Depth is 6.1" (15.5 cm) including mounting tabs
Product weight	1.13 lbs (515 g)
Regulatory compliance	CE, C-tick, C-UL, UL, FCC Class A, ICES, ROHS, VCCI
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(5984-D7)