FOX3 SR 311 PC

概述

Extron FOX3 SR 311 PC 光纤解析度转换接收器是一款设计用于 PowerCage 411 机箱的紧凑型单插槽模块，可通过光纤长距离传输符合 HDCP 标准的带嵌入音频的 HDMI 视频、USB HID 和 RS-232 控制信号。其设计着力于出色的高分辨率图像性能，并采用 Extron 全数字化技术，可通过两根光纤完美地传输像素级无压缩的分辨率高达 4K/60 @ 4:4:4 的图像，或通过单根光纤传输数学无损的 4K/60 @ 4:4:4 信号。USB HID 端口上的设备类型过滤功能可将其限定为仅支持 HID。FOX3 SR 311 PC 专为视音频和 KVM 系统而设计，还包括许多集成商友好的特性，如 Key Minder® 和实时的系统监控。

主要特性

• 接收来自 FOX3 系列发送器的光纤信号，并提供带嵌入音频的解析度转换 HDMI 视频、USB HID 和 RS-232 控制信号
• 高性能图像解析度转换器支持高达 4096x2160 @ 60 Hz、带 4:4:4 色度取样的可选输出分辨率
• 通过单根光纤传输分辨率高达 4096x2160 @ 60 Hz、带 4:4:4 色度取样的数学无损 4K 视频信号
• 通过两根光纤传输分辨率高达 4096x2160 @ 60 Hz、带 4:4:4 色度取样的无压缩 4K 视频信号
• 支持 HDMI 2.0 参数标准，包括高达 18 Gbps 的数据速率和高达 12 位的色深
• 符合 HDCP 2.3 标准
• 所有特性

技术参数

也请参阅我们的  PDF 格式的技术参数

FOX3 SR 201/301/311 PC
specification
Max. 4K Capabilities Resolution and Refresh Rate Chroma Sampling Max. Bit Depth per Color 4096 x 2160 at 60 Hz1 4:4:4 8 bit 3840 x 2160 at 60 Hz1 4096 x 2160 at 30 Hz1 10 bit 3840 x 2160 at 30 Hz1 4096 x 2160 at 60 Hz2 4:2:2 12 bit 3840 x 2160 at 60 Hz2 4096 x 2160 at 30 Hz2 4:4:4 3840 x 2160 at 30 Hz2
Frame rate3	24, 25, 30, 50, or 60 fps
Chroma sampling3	4:4:4, 4:2:2
Color bit depth2,3	8, 10, or 12 bits per color
Signal Type	HDMI 2.0, HDCP 2.3
Max. video data rate	18.0 Gbps
NOTE     1Supports lossless 4K video over one fiber or uncompressed 4K video over two fibers. 2Supports 12-bit color bit depth for uncompressed 4K video over two fibers. When using a FOX3 SR scaling receiver, the scaler must be in bypass mode to pass 4K video with a 12-bit color bit depth. 3Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.
NOTE     The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
NOTE     Optical data rate is 10 Gbps over one fiber and 20 Gbps over two fibers.
NOTE     These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825.
Optical fiber interconnection between transmitter and receiver
Number/type	1 or 2 SFPs
Connectors	1, 2 or 3 LC connectors
Operating distance
Singlemode	20 km (12.4 miles) with singlemode (SM) cables
Multimode	500 m (1640 feet) with 50 µm OM4 4700 MHz bandwidth laser optimized multimode cables
NOTE     The system works with OM1, OM2, and OM3 fiber at reduced distances.
NOTE     Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength	850 nm for multimode, 1310 nm for singlemode
Data rate	10.0 Gbps (1 fiber) or 20.0 Gbps (2 fibers)
Transmission power
Singlemode	-5.2 dBm, minimum
Multimode	-2.8 dBm, minimum
Receiver sensitivity
Singlemode	-12.6 dBm, maximum
Multimode	-11.1 dBm, maximum
Optical loss budget
Singlemode	+7.4 dB, maximum
Multimode	+8.3 dB, maximum
Video
NOTE     Appropriate HDMI to DVI cables or adapters are required for DVI signal output.
Maximum data rate	Up to 18.0 Gbps (6.0 Gbps per color)
Maximum pixel clock	594 MHz
Resolution range	640x4808 up to 4096x21601,2,3,4,5,6,7,8, ​480p7,8, 576p6, 720p3,4,5,6,7,8,9, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8,9, 2K1,2,3,4,5,6,7,8, ​3840x21601,2,3,4,5,6,7,8, 4096x21601,2,3,4,5,6,7,8 123.98 Hz, 224 Hz, 325 Hz, 429.97 Hz, 530 Hz, 650 Hz, 759.94 Hz, 8​60 Hz, 9120 Hz
Frame rate	24, 25, 30, 50, 60, or 120 fps
Color space	4:4:4, 4:2:2
Color bit depth	8, 10, and 12 bits per color
Signal Type	HDMI 2.0, HDCP 2.3
Horizontal frequency	24 kHz to 135 kHz
Vertical frequency	24 Hz to 120 Hz (depending on the resolution)
Formats	RGB and YCbCr digital video
Video output
Number/signal type	1 HDMI
Connectors	1 female HDMI type A
Video delay	Compressed or uncompressed = 2-3 frames (through the Scaler engine) Compressed = 0.5 frame, Uncompressed = 2 lines (in bypass mode)
Scaled resolution	640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1440x9008, 1400x10508, 1600x9008, 1600x12008, 1920x12008, 2048x12008, 2048x15368, 2560x10808, ​2560x14408, 2560x16008, 3840x21601,2,3,4,5,6,7,8, 4096x21601,2,3,4,5,6,7,8 ​480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2K1,2,3,4,5,6,7,8, 1 custom, bypass 123.98 Hz, 224 Hz, 325 Hz, 429.97 Hz, 530 Hz, 650 Hz, 759.94 Hz, 8​60 Hz
Power for active cables	1.6 watts max. for HDMI port
Audio
Audio bits per sample	16, 20, 24
Sampling rate	48 kHz
Audio output
Number/signal type	1 digital audio, de-embedded with HDMI output (2-ch, PCM only)
Connectors	1 female HDMI (shared with video output)
Gain error	± 0.5 dB channel to channel
Volume control range	100% to 0% (0 - 100 in 1% steps)
Source formats	HDMI - 2-CH LPCM
Audio delay	Compressed or uncompressed = 2-3 frames Compressed = 0.5 frame, Uncompressed = 2 lines (in bypass mode)
Communications
Serial pass-through port	1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole
Baud rates	9600 to 115,200 baud
Pass-through pin configuration	1 = Tx, 2 = Rx, 3 = Gnd
Program control	Extron control/configuration program for Windows® (PCS) Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer® ver 6.0 or higher, Telnet
USB extension (USB)  — FOX3 SR 301 PC and FOX3 SR 311 PC only
Standards	USB 2.0, USB 1.1, USB 1.0 compatible
Host support	xHCI (USB 3.2 Gen 1/2, USB 3.1 Gen1/2, USB 3.0) (FOX3 301 models only), ​EHCI (USB 2.0) (FOX3 301 models only), OHCI/UHCI (USB 1.1)
Data rates	Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480Mbps)
Data transfer types	Bulk, control, interrupt, and isochronous
NOTE     Extron strongly recommends compatibility testing while designing, and before installing, any system that includes a USB camera. There are several unique transport methods in use by USB camera manufacturers and the level of support is governed by this. Please contact an Extron Applications Engineering for more information.
USB device ports
FOX3 SR 301 PC
Number/signal type	(1) 2-port USB HID hub (1) 1-port USB 2.0 hub
Connectors	3 USB type A, female (2 USB HID and 1 USB 2.0)
Maximum built-in USB hubs	0
Minimum built-in USB hubs	0
NOTE     ​When configured endpoint to endpoint, there are 0 hubs. When configured with a FOX3 Matrix, there is 1 hub.
NOTE     This applies to the USB 2.0 hub only.
Available USB power	USB 2.0 port = 500 mA USB HID ports = 100 mA
FOX3 SR 311 PC
Number/signal type	(1) 2-port USB HID hub
Connectors	2 USB type A, female (2 HID)
Available USB power	USB HID ports = 100 mA
General
Power supply	Internal Supplied by PowerCage 411 enclosure
Power consumption
FOX3 SR 201 PC	19.2 watts
FOX3 SR 301 PC	24.9 watts
FOX3 SR 311 PC	20.8 watts
Ambient temperature/humidity	Storage: -40 to +158°F (-40 to +70°C) / 10% to 90%, noncondensing Operating: +32 to +122°F (0 to +50°C) / 10% to 90%, noncondensing
Cooling	Fan, air flows from front to rear within the PowerCage 411 enclosure
Thermal dissipation
FOX3 SR 201 PC	61.8 BTU/hr
FOX3 SR 301 PC	69.1 BTU/hr
FOX3 SR 311 PC	63.5 BTU/hr
Module dimensions	1.6” H x 3.5” W x 8.0” D (4.1 cm H x 8.9 cm W x 20.3 cm D) (Each fits a single slot opening in a PowerCage 411 enclosure.)
Product weight
FOX3 SR 201 PC	0.9 lbs (0.4 kg)
FOX3 SR 301 PC	0.9 lbs (0.4 kg)
FOX3 SR 311 PC	0.9 lbs (0.4 kg)
Regulatory compliance	CE, c-UL, C-tick, FCC Class A, FDA Class 1, ICES, UL, VCCI Complies with the appropriate requirements of RoHS, WEEE.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(6616-D3)