DTP3 T 203

概述

Extron DTP3 T 203 是一款 3 路输入发送器，可通过单根 CAT 6A 屏蔽电缆将 USB-C® 视频、HDMI、嵌入式音频、电源和控制信号发送至 100 m (330') 远的距离。它支持分辨率高达 4K/60 @ 4:4:4 的视频信号，并符合 HDCP 2.3 标准。为了增强图像品质及减少延迟，它还能对所有支持的视频分辨率实行无压缩传输。双缓冲 HDMI 和 DTP 输出、60 W USB-C 充电和以太网远程控制等功能有助于在专业环境中的集成。易于集成的特性包括 EDID 管理器 (EDID Minder®)、各路输入之间的自动切换以及用于远程视音频设备控制的双向 RS-232 直通。DTP3 T 203 发送器的标准半机架宽外壳非常适合隐蔽地放置在讲台内、桌下或其它符合应用需求的空间。

主要特性

• 通过单根 CAT 6A 屏蔽电缆将 USB-C® 视频、HDMI、嵌入式音频、电源以及控制信号传输至 100 m (330') 远的距离
• 支持分辨率高达 4K/60 @ 4:4:4 的视频信号，包括 5K
• 为 USB-C 信号源设备提供高达 60 W 的电源
• 支持超宽的屏幕宽高比，包括 21:9 和 5K
• 各路输入之间的自动切换
• 支持 HDMI 2.0b 参数标准，包括高达 18 Gbps 的数据速率、HDR、高达 12 位的色深、3D、高清无损的音频格式和 CEC
• 所有特性

技术参数

也请参阅我们的  PDF 格式的技术参数

DTP3 T 203
Specification
Max. 4K Capabilities Resolution and Refresh Rate Chroma Sampling Max. Bit Depth per Color 5120x1440 at 60 Hz 4:4:4 8 bit 5120x2880 at 30 Hz 4096x2160 at 60 Hz 3840x2160 at 60 Hz 4096x2160 at 30 Hz 12 bit 3840x2160 at 30 Hz 4096x2160 at 60 Hz 4:2:0 3840x2160 at 60 Hz
Frame rate1	24, 25, 30, 50, or 60 fps
Chroma sampling1	4:4:4 or 4:2:2
Color bit depth1	8, 10, or 12 bits per color
Signal Type	HDMI 2.0b, DisplayPort 1.2 (Alt Mode), HDCP 2.3
Max. video data rate	18 Gbps (6 Gbps per color)
NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.
Video
Maximum data rate	18 Gbps (6 Gbps per color)
Maximum pixel clock	600 MHz
Resolution range
HDMI
VESA	640x480 to 4096x2160
SMPTE	Up to 1080p @ 120 Hz or 4K @ 60 Hz (4:4:4 chroma sampling)
Ultra Wide & 5K	2560x1080, 3440x1440, 3840x1080, 3840x1440, 3840x1600, 5120x1080* @ 30 Hz, 5120x1440* @ 30 Hz, 5120x2160 @ 30 Hz, 5120x2560* @ 30 Hz, 5120x2880* @ 30 Hz
NOTE     *Indicated rates not available via standard 256-byte EDID and may require custom video card configuration.
USB-C
VESA	640x480 to 4096x2160
SMPTE	Up to 1080p @ 240 Hz or 4K @ 60 Hz (4:4:4 chroma sampling)
Ultra Wide	2560x1080, 3440x1440, 3840x1080, 3840x1600
Color bit depth	8, 10, or 12 bits
Formats	RGB and YCbCr digital video
HDR	HDR10, HDR10+, Dolby Vision
Standards	DVI 1.0, HDMI 2.0b, DisplayPort 1.2 (Alt Mode), HDCP 1.x, HDCP 2.3
Video input
Number/signal type	2 HDMI, 1 DisplayPort (Alt Mode, 4 HBR2 lanes)
DisplayPort video	1 DisplayPort Alt mode, DP 1.2 (4 lanes), RBR/1.62 Gbps, HBR/2.7 Gbps, HBR2/5.4 Gbps
Connectors	2 female HDMI type-A, 1 female USB type-C
Input cable length	Up to 12' (3.7 m)
Horizontal frequency range	15 kHz to 270 kHz for resolutions up to 18 Gbps
Vertical frequency range	24 Hz to 240 Hz for resolutions up to 18 Gbps
NOTE     Extron requires using USB-C cables supporting 4 DisplayPort lanes.
Video output
Number/signal type	1 Single link HDMI (or DVI-D*), 1 DTP
Connector	1 female HDMI type-A, 1 female RJ-45
Output power for active cables	1.25 watts max for HDMI port
NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Interconnection between transmitter and receiver
Connector	1 female RJ-45 per unit
Termination standard	TIA/EIA T568B
Signal transmission distance (using XTP DTP 24 cable)
1080p @ 60 Hz	Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
4K/UHD @ 30 Hz	Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
4K/UHD @ 60 Hz	Up to 150' (45 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable Using 1 coupler w/ 3'-9' patch cable Using 2 couplers w/ two 3' patch cables (each patch cable cannot exceed 3') Using two punch downs w/ two 3'-9' patch cables
4K/UHD @ 60 Hz	Up to 175' (53 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable w/ no couplers
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP cable
Signal transmission distance (using XTP DTP 22 cable)
1080p @ 60 Hz	Up to 330' (100 m) using XTP DTP 22 cable
4K/UHD @ 30 Hz	Up to 330' (100 m) using XTP DTP 22 cable
4K/UHD @ 60 Hz	Up to 330' (100 m) using XTP DTP 22 cable Using 1 coupler w/ 3'-16' patch cable Using 2 coupler w/ two 4' patch cables (each patch cable cannot exceed 4')  Using two punch downs w/ 3'-8' patch cables
Cable requirements	Solid conductor, 22 AWG or better
Cable recommendations	500 MHz bandwidth, STP cable
NOTE     Extron XTP DTP 22 shielded twisted pair cable is strongly recommended for optimal performance.
Communications
Serial control port	1 RS-232, 3.5 mm captive screw, 3-pole, rear panel
Pin configuration	Pin 1 = Tx, pin 2 = Rx, pin 3 = GND
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
USB control port	1 female USB type-C, front panel
USB standards	USB 2.0 low speed
Ethernet data rate	10/100Base-T, half/full duplex, with auto detect
Ethernet protocol	ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet, IEEE 802.1X, SSH, SNMP
Program control	Extron control/configuration program for Windows®, Extron Simple Instruction Set™ (SIS™),Telnet
Contact closure/tally output	(2) 3.5 mm captive screw, 4-pole
General
Power supply	Internal Input: 100 to 240 VAC, 50-60 Hz
Power consumption	90.3 W
Ambient temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on the top and sides
Thermal dissipation	95.7 BTU/hr
USB-C power delivery	​​5 VDC @ up to 3 A, 9 VDC @ up to 3 A, 15 VDC @ up to 3 A, 20 VDC @ up to 2.25 A or 20 VDC @ up to 3 A
NOTE     USB-C power delivery reduces to 45W when DTP3 Send Power feature is active.
Mounting
Rack mount	Yes, with optional rack shelf kit
Enclosure type	Metal
Enclosure dimensions	1.75" H x 8.75" W x 8.50" D (1U high, half rack wide) 44 mm H x 222 mm W x 152 mm D (Depth excludes connectors)
Product weight	2.17 lbs (0.98 kg)
Regulatory compliance	CE, c-UL, UL, CE**, C-tick, FCC Class A**, ICES, VCCI, AS/NZS, RoHS, WEEE
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice
(6523-D11)