DMS 1600 和 DMS 3600

主要特性

Extron DMS 系列模块化 DVI 矩阵切换器代表了 DVI 矩阵切换的一个新水准。它们将固定输入/输出矩阵切换器的简便性和可靠性与模块化矩阵切换器的方便性和灵活性相结合。DMS 系列矩阵切换器可接受 DMS DVI 或 DMS 光纤矩阵板的任意组合。可提供 4 路输入、4 路输出和 4x4 输入/输出板，根据选定的 DMS 矩阵切换器机箱，提供了从 4x4 到 36x36 不等的多种输入/输出尺寸组合。DMS 系列适用于广泛的应用环境，可以对无复制保护的高分辨率 DVI 数字视频信号进行路由。

特性

• 根据选定的 DMS 矩阵切换器机箱，提供了从 4x4 到 16x16 或 36x36 不等的输入/输出尺寸
• 模块化及可现场升级的设计
• 备有 DMS DVI 或光纤矩阵输入/输出板供选择
• 支持高达 4.95 Gbps 的数据速率 - 每色1.65 Gbps
• EDID 管理器 (EDID Minder^®) 自动地管理已连接设备之间的 EDID 通信
• 以太网监视及控制
• 控制软件

技术参数

也请参阅我们的  PDF 格式的技术参数

DMS 3600 Series
Video — DMS DVI boards
Routing	From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs
Gain	Unity
Resolution range	Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz
Signal Type	Single-link DVI digital video signals are supported.
Digital video	RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
NOTE     The DMS DVI Series boards are not compatible with HDMI.
Digital audio	Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content
Consumer Electronics Control (CEC)	Not supported
EDID and DDC	Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP	Not supported
HPD	Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate	4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock	165 MHz
Standards	DVI 1.0
Switching speed	200 ns, max.
Video input — DMS 44 DVI and DMS 4i DVI input boards
Number/signal type	4 digital RGB single link DVI-D per input board
Connectors	4 female DVI-I (digital only) per input board
Equalization	Automatic
Input cable length	100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
Video output — DMS 44 DVI and DMS 4o DVI output boards
Number/signal type	4 digital RGB single link DVI-D per output board
Connectors	4 female DVI-I (digital only) per output board
Re-clocking	Automatic
Output cable length	50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
Peripheral device power	250 mA per output
Communications — switcher host ports
Serial host control port	1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector
Baud rate and protocol	9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity
Serial control pin configurations
9-pin female D connector
RS-232	2 = Tx, 3 = Rx, 5 = Gnd
RS-422	2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+
USB control ports	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Ethernet control port	1 RJ-45 female
Ethernet data rate (for network communication)	10/100Base-T, half/full duplex with autodetect
Ethernet protocol	ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
Ethernet default settings	Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off
Web server	Up to 200 simultaneous sessions 7.0 MB nonvolatile user memory
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer® ver. 6 or higher, Telnet
General
Power supply	Internal, 2* (positive-negative) Input: 100-240 VAC, 50-60 Hz *A redundant power supply is standard.
Power consumption	212 watts Measured fully loaded with (9) 4x4 I/O boards
Power consumption: I/O boards
Ambient temperature/humidity	Storage: -40 to +158°F (-40 to +70°C) / 10% to 90%, noncondensing Operating: +32 to +122°F (0 to +50°C) / 10% to 90%, noncondensing
Cooling	Fan, right to left (as viewed from front panel)
Thermal dissipation, full load	724 BTU/hr Measured fully loaded with (9) 4x4 I/O boards
Rack mount	Yes
Enclosure type	Metal
Enclosure dimensions	14.0" H x 17.0" W x 12.25" D (8U high, full rack wide) (35.6 cm H x 43.2 cm W x 31.1 cm D) (Depth excludes connectors and handles. Width excludes rack ears.)
Product weight with boards installed	38.5 lbs (17.5 kg)
Shipping weight with boards installed	48 lbs (22 kg)
Regulatory compliance	CE, c-UL UL,C-tick, FCC Class A, ICES, KC, VCCI, Complies with the appropriate requirements of RoHS, WEEE
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(5617-D9)