DTP T HD2 4K 230

主要特性

Extron DTP T HD2 4K 230 是一款发送器，可通过单根 CATx 屏蔽电缆将带嵌入音频的 HDMI 以及双向 RS‑232 和红外信号发送至 70 m (230') 远的 Extron DTP^® 功能产品。它提供了一路支持本地数字视频监视的 HDMI 输入和环出，以及一路 DTP 输出。DTP T HD2 4K 230 可支持分辨率高达 4K 的视频信号。它还提供了许多便于集成的特性，如 EDID 管理器 (EDID Minder^®)、密钥管理器 (Key Minder^®)、用于远程视音频设备控制的双向 RS‑232 和红外直通，并兼容具有 HDBaseT 功能的设备。DTP T HD2 4K 230 小巧的外壳尺寸以及远程供电功能相结合，使其非常适用于隐蔽地安装在讲台、桌下或其它任何符合应用需求的空间内。

特性

• 通过单根 CATx 屏蔽电缆将 HDMI 及控制信号传输至 70 m (230') 远的距离
• HDMI 输入环出
• 支持分辨率高达 4K 的计算机和视频信号
• 强烈建议使用 Extron XTP DTP 24 屏蔽双绞线电缆，以达到最佳的性能表现
• 兼容 CATx 屏蔽双绞线电缆
• DTP 输出兼容具有 HDBaseT 功能的设备
• 提供经 DoDIN APL 认证的产品 — 本产品可根据要求提供国防部信息网络认证版本。如有具体需求，请联系 Extron。
• 提供符合 TAA 的型号 — Please inform your local Extron representative if your order requires compliance with TAA regulations.

技术参数

也请参阅我们的  PDF 格式的技术参数

DTP T HD2 4K 230
specification
Frame rate1	24, 25, 30, 50, or 60 fps
Chroma sampling1	4:4:4, 4:2:2, or 4:2:0
Color bit depth1	8 bits per color
Signal Type	HDMI, HDCP
Max. video data rate	10.2 Gbps (3.4 Gbps per color)
NOTE     1Subject to the maximum data rate limit. Use our calculator (http://www.extron.com/product/videotools.aspx) to determine video parameters supported by this data rate.
Video
Maximum data rate	10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock	300 MHz
Resolution range	Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling (*Reduced blanking)
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Formats	RGB and YCbCr digital video
Standard	DVI 1.0, HDMI, HDCP, CEA-861E
Video input
NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Number/signal type	1 single link HDMI (or DVI-D*)
Connector	1 female 19-pin HDMI type A
Input cable length	Up to 50' (15 m) with 225 MHz signal, 100' (30 m) with 165 MHz signal
Video output
Number/signal type	1 single link HDMI (Loop Thru) 1 DTP 230 (Output)
Interconnection between transmitter and receiver
Connector	1 RJ-45 jack
Termination standard	TIA/EIA T568B
Signal transmission distance
1080p @ 60 Hz	Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
2560x1600 @ 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
4K/UHD @ 30 and 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (shielded twisted pair)
NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
NOTE     Output mode signaling: DTP:             HDMI with embedded audio, analog audio, RS-232 and IR, and remote power HDBaseT:   HDMI with embedded audio plus RS-232 and IR
Control/remote
USB control port	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Program control	Extron Simple Instruction Set (SIS™), Extron Product Configuration Software (PCS)
Communications — external device (RS-232/IR over TP)
NOTE     Protocol is mirrored between the connected DTP 230 Rx or DTP 330 Rx endpoints and the "Over TP" ports on the DTP T HD2 4K series. Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP 230 Rx or DTP 330 Rx endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints. There is no RS-232 or IR insertion from any DTP T HD2 4K control port to the "Over TP" ports.
Serial control port	RS-232 via (1) 3.5 mm, 5-pole captive screw connector (connector is shared with IR control ports)
Baud rate and protocol	300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
Serial control pin configuration	Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
IR pass-through control port	(1) 3.5 mm, 5-pole captive screw connector (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
IR control pin configuration	3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts
Power consumption
Device	6.0 watts
Device and power supply	7.5 watts
Remote power budget	12 watts
Ambient temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Thermal dissipation
Device	19.2 BTU/hr
Device and power supply	24.2 BTU/hr
Rack mount	Yes
Enclosure type	Metal
Enclosure dimensions	1.0" H x 4.3" W x 6.0" D (1" high, 1/4 rack wide) 2.5 cm H x 10.9 cm W x 15.2 cm D (depth excludes connectors)
Product weight	0.5 lb (0.3 kg)
Shipping weight	1.0 lb (0.5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE**, C-tick, FCC Class A**, ICES, VCCI
NOTE     **CE and FCC testing is conducted with STP cable.
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(5382-D5)